Checkĭisable DHCPv6 stateless mode for this server The Subnet mask should match the subnet mask of the server, and the Default gateway will be the IP address of your router. Also ensuring the range is large enough to accommodate the number of devices on your network. You should specify a starting IP address and ending IP address that does not conflict with your static IP assignments. WINS is not required for applications on this networkĭialog box, type values for all required items. , ensure that the IP address matches the IP address of the SBS 2011 Essentials server, and then click
, verify that the name of the DNS domain that clients use for name resolution is correct. , select the IP addresses that are connected to the subnets for which you want to provide DHCP service, and then click In the left pane of Server Manager, click To install the DHCP Server role on SBS 2011 Essentials follow these steps: Additionally, add the exact same subnet mask and default gateway that was identified earlier when running ipconfig, and lastly enter the IP address of the server as the preferred DNS server and then click You will want to enter an IP address within the same network range as noted earlier (e.g 192.168.15.2). Which will bring up the following screen as shown below. Right click on your network card and select
, and make a note of the IPv4 address, Subnet Mask and Default Gateway.įrom the run menu or an elevated cmd prompt, which will load the Network Connections control panel. To find out your current TCP/IP settings, launch an elevated command prompt and run the command Installing the DHCP Server role without a static IP address is not recommended. To do so, first, you need to assign a static IP address to the server's network card. In some cases you may want to have the SBS 2011 Essentials server be the DHCP server instead of your router. Moloy Tandon and Wayne Gordon McIntyre from Commercial Technical Support]įor the steps to configure DHCP Server on Windows Server 2012 Essentials.īy default Small Business Server 2011 Essentials does not install the DHCP Server role and DHCP duties are handled by your router. First published on TechNet on Sep 22, 2011
0 kommentar(er)
